This ribbon wire works for mass termination. The twist and flat structure allows the signal to go a few feet further then on a regular flat ribbon. Exact distances will vary with type of signal. The flat sections are 8 inches apart. Connector spacing will be in multiples of 8 inches.
ImpedanceCapacitanceConductor size
115 ohms16 pf/ft28 AWG (7x36)
The connectors typically used on this wire are ID50F and/or CE50F.
This ribbon cable is .05 inch pitch, a typical connector would be two row .1 inch pitch, see CAB050-RI for .05 pitch economy flat unshielded ribbon with same number of conductors, CAB050-RSR for a .05 inch pitch ribbon bundled in a round shielded jacket, CAB050-RM for a 1mm pitch (about .04 inch) ribbon with same number of conductors, or CAB050-RH for .025 pitch (double density) ribbon with same number of conductors.
Categories and Products Related to: 28 Gauge 25 Pair Twisted Pair .05" Pitch Ribbon Cable
Click Heading for Related products >Main Product Categories>Wire >Ribbon >CAB050-RI-TW
>Cable Parts >Wire >Ribbon >
>Wire >Other >Ribbon >

Category: Wire and Cable Ribbon Cable

Part Number: CAB050-RI-TW .....

Price: $2.74


All contents Copyright . All Rights Reserved.
jewelry boxes
stats counter