3-way Electric Ball Valve-(PDF)

3-Way Electrically Actuated Ball Valves

Motorized Diverter or Sampling Valves -- Use as 2 inlets or 2 outlets

Features:

• Rugged plastic construction for corrosive atmospheres.
• Direct manual override with visual position indication.
• Flow direction indicators and Running lights.
• Thermally protected, heavy duty motor.
• IP-54/Nema 4X water and dust tight enclosure.
• Easily attached to MBV Ball Valves in a minute or less; no exotic modifications or special adapter kits required.
• Simple connections for remote operation and position indication.
• All three ports are true union for cost, installation time, and space savings.

Valve Design:

Valve is ordered with either a two-hole or three-hole ball. The two-hole ball switches from one inlet (or outlet) to the other, with a momentary no-flow condition. The three-hole ball ensures that flow is uninterrupted, with a momentary mixing of flow from the two ports. It is suggested that you specify the two-hole ball if you want to prevent the two streams from mixing, and specify the three-hole ball if you are concerned about dead-heading with a momentary no-flow condition. If you are unsure, you are invited to contact our Technical department for assistance at (973) 256-3000.

Materials of Construction:

Actuator enclosure is primarily PETRA, a rugged, corrosion-resistant thermoplastic. Other materials exposed to the atmosphere include Lexan, Stainless Steel, and Buna-nitrile. Valve materials are PVC or Corzan®. Valve seats and bearings are PTFE. Wetted seals are Viton® or EPDM.

Temperature and Pressure:

Pressure rating for both PVC and CPVC is 175 PSI at 75 degrees F (24 C). Maximum temperature for PVC is 140 degrees F (60 C); maximum temperature for CPVC is 180 degrees F (82 C).

Wiring Diagram:

If momentary signal is desired, standard timing relays can be used. Wiring diagram is available from our Technical Group; 973-256-3000.

Specifications:

Housing Material:   Petra (Terephthalate) Thermoplastic
Seals:              Buna N
Ambient Temp.:      0-50 degrees C
Rating:             IP-54, NEMA 4X
Voltages:           24, 120, 220, 230, 240 - (50 or 60 Hz)
Open/Close Time:    12 seconds

Valve Sizes         1/2"     3/4"      1"
Cv Factors:         4.0      8.0       13.0
Duty Cycle:         50% @ 70 degrees F

Valve Sizes         1-1/2"   2"
Cv Factors:         38.0     39.0 
Duty Cycle:         20% @ 70 degrees F         

Dimensions:

CAD Drawing:

If you need a non-CAD drawing of Series TEBV, you may simply right-click the dimensional drawing above, and "save as" in your desired directory.

If you would like a full-fledged .dwg file, please read the following note, then click on the CADlink icon below.

NOTE THAT YOU WILL NEED TO DOWNLOAD TWO SEPARATE FILES TO GENERATE A DRAWING OF SERIES TEBV: First, download the TMBV file, which is the 3-way ball valve by itself, then download the EBV file, which is the actuator. Download EBV-65.DWG for 1/2" thru 1" valves. Download EBV-104.DWG for 1-1/2" and 2" valves. By combining the drawings, you will have TEBV.

HELPFUL LINKS:

3-Way Solenoid Valves: If you need the electric actuation of TEBV, but perhaps you need instantaneous on/off control, or a much smaller sized valve, or a lower-cost valve...Series THP is a compact 3-way solenoid valve.

Series MBV -- True Blue Ball Valves -- Manual version of Plast-O-Matic's popular ball valve line; constructed with integral mounting lugs for easy addition of an actuator when needed. Features also include Trunnion design, reinforced shaft and PTFE thrust washer. 2-way and 3-way designs. Socket, threaded, flanged ends, NPT, BSP or Metric; customizing available.

Series ABV -- Actuated Ball Valves -- Pneumatically or hydraulically powered actuators for 2-way and 3-way ball valves, sizes 1/2", 3/4", and 1". Air x air and "fail safe" air x spring models available; converts easily between types. Manual override standard.

Series ABR -- Actuated Ball Valves -- Pneumatically or hydraulically powered actuators for 2-way and 3-way ball valves, sizes 1-1/4", 1-1/2", and 2". Air x Air and "fail safe" Air x Spring models available. Manual override standard on air x air, optional on air x spring version. Air x spring converts easily between fail safe "open" and fail safe "closed."

Series TABV & TABR -- Actuated Ball Valves -- Explanatory page for pneumatically or hydraulically actuated 3-way ball valves, all sizes. For actuator specifications, use the above links for the appropriate size.

Online Pressure Drop Calculator -- Allows you to easily determine the probable pressure drop across a valve. Note: For comparison and illustrative purposes only; not to be relied on for system design.

Top of Page

Kynar® is a registered trademark of Elf Atochem.,
Corzan™ is a trademark of Noveon, Inc.

TRUE BLUE® and ; are registered trademarks of Plast-O-Matic Valves, Inc.
CADlink© Plast-O-Matic Valves, Inc. 2001

DID YOU KNOW - that there is NO VOICEMAIL at Plast-O-Matic Valves, Inc. headquarters and manufacturing facility? When you call us with a technical question, or a concern, problem, or any reason at all, we always take your call. You are assured of speaking directly to a valve specialist or engineer..... Guaranteed!

free web counter