Installation & Maintenance Instructions Please scroll down and click on appropriate Series. Most links below are .PDF files or .DOC (Word) files. If the product line you need is not found, please scroll to bottom for e-mail request. If you need the Adobe Acrobat Reader please click here
For Catalog Cut Sheets .... please click here
Seal kits and parts can be ordered for virtually every True Blue valve. You should have a preventive maintenance schedule in place for every valve on premises..... and be sure to order back up seal kits before you need them! For assistance, please consult your local distributor, or call our Technical Department at (973) 256-3000 for personal assistance.
|
|
THREADED CONNECTIONS: NEVER use a pipe wrench, channel lock wrench, or any metal wrench to install plastic valves. Always tighten "hand tight" -- then 1/4-turn with a strap wrench.
Not all thread sealants, tapes, compounds, pastes, dopes, thread locks, etc. are compatible with thermoplastics. Verify compatibility with sealant manufacturer prior to use.CEMENTED CONNECTIONS: DO NOT allow primer and/or solvent cement to touch any area other than the piping socket.
SEAL KIT BASICS: Never use a screwdriver or sharp instrument of any kind to remove o-rings and other seals. While our valves are quite rugged, a metal instrument may scratch the plastic sealing surface...and then the o-ring may not be able to seal into the scratch or damaged area. Please use extreme care.
Can't find what you need? Please use this e-mail link to tell us what product, and we will e-mail a file to you.

Kynar® is a registered trademark of Arkema.,
Corzan™ is a trademark of Noveon Inc., Viton® is a registered trademark of DuPont Dow Elastomers,
Geon® is a registered trademark of The Geon Co.,
;, The Stabilizer® and True Blue® are registered trademarks of Plast-O-Matic Valves, Inc.
CADLINK© Plast-O-Matic Valves
| free web counter | |