|
|
Extend your USB device up to 50m!Using standard CAT5/5e/6 network cable, the CAT5 USB Extender allows the distance between a USB device and a host computer to
be extended by up to 50m. It consists of a local unit with a USB Type A Male (host computer side) and a remote unit (device side) with a built-in USB Type A Female connector.
A low cost network patch cable is required to connect the two units together.
- Simple to install - "Plug & Play"
- Compliant with USB 1.1 specification, OHCI and UHCI
- Extends a single USB port over low cost
CAT5/5e/6 network cable
(UTP or STP) by up to 50m
Certain low speed USB devices may work up to 100m
Bus-powered - no external power supply required for local or remote unit
Connectors:
- Local unit: Type A USB Male & RJ-45 Female
- Remote unit: Type A USB Female & RJ-45 Female
Stylish transparent plastic housing with silver internal coating
100% compatible with USB hubs and other devices
Compatible with all major USB enabled operating systems
Please Note:
The USB standard allows a maximum of 5 hubs to be used between a host computer and a device. Depending on the length of the cable used, this CAT5 USB Extender introduces a
signal delay equivalent to 2 hubs over 20m; 3 hubs over 30m; and 5 hubs over 50m. Therefore, when using a 50m cable with this Extender, no extra hubs or extension cables can
be used between the computer and the device. |
