RS366 pinouts, RS366 interface between Data Terminal Equipment and Automatic Calling Equipment for Data Communication

Introduction
In our documentation center we found a document about this interface. It's brief and all info that might be handy for you people out there is provided here (ofcourse as is). If you have more info, let us know!

General
According to this document the RS366 interface describes the "Interface Between Data Terminal Equipment and Automatic Calling Equipment for Data Communication." To tell that in a normal language is almost impossible. There are situations where automatic dialing is required. Some phone companies deliver an automatic dialing unit for these situations and this interface is used to connect a DTE to these Automatic Calling Equipment (ACE).

Pin	Function	Description	Circuit EIA
2	Digit Present	A signal given to the ACE indicating that the digit lines contain a digit	DPR
3	Abandon Call and Retry	An indicator signal from the ACE that it could not make a connection. Could be 'busy'.	ACR
4	Call Request	A signal from the DTE that tells the ACE to go 'off hook'	CRQ
5	Present Next Digit	A signal from the ACE to the DTE to indicate that the ACE is ready to receive the next digit.	PND
13	Distant Station Connected	Indicator from ACE to DTE that the call is succesfully made.	DSC
14-17	Digit Signal Circuits	Four lines containing a parallel BCD dial digit (10 digits, plus control digits)	NB1-NB8
22	Data Line Occupied	An indicator that is used by the ACE to let the DTE know that the line it wants to use is used by another device.	DLO