PairMaster

The PairMaster gives its user the ability to verify and test basic LAN cabling installations. This unique LAN Cable tester can identify one of up to 16 cables with the simply press of a button. The PairMaster will also check for 8 faults including Near End Crosstalk (NEXT) for double split pairs:

 Overvoltage
 Open Pair
 Shorted Pair
 Crossed Pair
 Split Pair
 Reversed Pair
 Transposed Pair
 Double Split Pair

PairMaster, Includes: Remote Identifiers #1 and #2, (1) RJ-45 Patch Cable, (2) - RJ-45 In-Line couplers , (1) - 9 Volt Battery, Instruction Manual.
Cat No. 3240

PairMaster Kit, Includes: All 16 Remote Identifiers, (1) RJ-45 Patch Cable, (2) - RJ-45 In-Line couplers , (1) - 9 Volt Battery, and Instruction Manual conveniently stored in a hard-sided carrying case.
Cat No. 3241

Features

 EIA/TIA 568 configuration for UTP Ethernet and Token Ring LAN Cables
 Identifies 1 of 16 un-energized cables with the press of a button
 Test 1/2, 3/6, 4/5, 7/8 Cable Pairs
 Detects 8 Faults including Near End Crosstalk (NEXT) for Double Split pairs
 2-seven segment LEDs display Fault Codes and Remote ID numbers
 Overvoltage Indication on PairMaster and Remote Identifiers
 2 Year Warranty on PairMaster
 1 Year Warranty on Remote Identifiers
 Low Battery Indication
 4 PASS LEDs (Green)
 4 FAIL LEDs (Red)

 

 Wire-Mapping The PairMaster will check the point to point wiring, commonly referred to as wire-mapping. This tells the user whether or not the cable pairs, 1/2, 3/6, 4/5, 7/8, are wired correctly at both ends. Green LEDs indicate Pass, Red LEDs indicate Fail. If a fault is detected, the corresponding Fault Code is displayed on the large, two digit, seven segment LEDs.

 Near End Crosstalk (NEXT) The Near End Crosstalk feature checks for excessive AC coupling between each pair in a cable. Once again, if a fault is detected, the PairMaster will display the Fault Code.

 Cable Identification The PairMaster can also identify a LAN Cable within a bundle. By connecting up to 16 available Remote Identifiers to the workstation wall jacks, the PairMaster will identify and display the number of the Remote Identifier connected to the cable. The user can then easily document the network topology.

 Overload Protection The PairMaster has built-in Overvoltage Protection. When voltage from a Central Office Battery is detected, the unit will flash (OL) and shut itself down.

 Remote Identifier The Remote Identifier is a small unit used in conjunction with the Triplett PairMaster for LAN Cable identification. The Remote Identifier properly terminates the LAN Cable when connected to the workstation wall jacks. It contains the necessary circuitry to allow the PairMaster to verify proper wiring within the cable. Each of the 16 Remote Identifiers has an overvoltaged LED which lights to indicate the presence of damaging voltage.

Specifications

Accessories

Catalog No. Description 3240-1 Remote Identifier # 1 3240-2 Remote Identifier # 2 3240-3 Remote Identifier # 3 3240-4 Remote Identifier # 4 3240-5 Remote Identifier # 5 3240-6 Remote Identifier # 6 3240-7 Remote Identifier # 7 3240-8 Remote Identifier # 8 3240-9 Remote Identifier # 9 3240-10 Remote Identifier # 10 3240-11 Remote Identifier # 11 3240-12 Remote Identifier # 12 3240-13 Remote Identifier # 13 3240-14 Remote Identifier # 14 3240-15 Remote Identifier # 15 3240-16 Remote Identifier # 16 3240-17 Remote Identifiers # 1 thru # 4 3240-18 Remote Identifiers # 5 thru # 8 3240-19 Remote Identifiers # 9 thru # 12 3240-20 Remote Identifiers # 13 thru # 16 10-3959 Hard-Sided Carrying Case w/strap 10-2961 Soft Carrying Case 26-889 RJ-45 Patch Cable (Category 5) 2455-781 RJ-45 In-Line Coupler 37-48 9 Volt Alkaline Battery