Part
Number: ADP5210
Product Description: Use Cat 5 Cable to Extend a VGA Monitor up to 250
feet
Category:
Electronic items w/DH15, Electronic items w/MP08, Amps,
Splitters, VGA to TV, Console, and Video Boosters| List
Price: $ | 171.00 |  | | Dealer Price: $
| #####.## |  | Product Weight:
3.2 |  |
|
The VGA Extender allows VGA video
signals to be transmitted up to 500ft / 135m via 4-pairs CAT5 STP or UTP cable.
The VGA Extender Kit can be used in home or commercial applications as a smart,
fast and cost-effective solution. It eliminates costly and bulky VGA cable,
allowing VGA monitors to be connected extended distances from the PC via
standard twisted pair cable. This product is ideal for classrooms, lecture
halls, retail kiosks, video information displays, overhead projector systems,
PC-training systems, and tradeshows PC demo systems. | | | | Features: | -
Passive device, no power required
- Includes Transmitter and Receiver
units
- Supports up to 1280x1024 pixels
- Distance up to 500ft / 135m via
standard CAT5 STP or UTP cable instead of VGA cable
- Transmitter has
built-in virtual DDC to avoid improper resolution and frequency settings
-
Transmitter has built-in sync mode selection for signal stability
- Receiver
has built-in sync filter level adjustment for signal stability
|
| | | | Recommended Cable: 1. CAT5e UTP/STP or CAT6
UTP cable. 2. Certain brands or models of monitors are highly
sync-sensitive. In these cases we recommend using STP (shielded twisted pair)
cable instead of UTP (unshielded twisted pair) cable. | | Panel
View: | | Transmitter |  Front
View |  Rear
View | | Receiver |  Front
View |  Rear
View |
Max. Distance via
CAT5 Cable | 640x480 pixels (15MHz) | 500ft / 135m |
800x600 pixels (30MHz)
| 350ft / 105m
|
1024x768 pixels (60MHz) | 250ft / 75m | 1280x1024 pixels (100MHz)
| 200ft / 60m
| |
Specification: | | Transmitter | Receiver | | Devices
| DVR, VGA Monitors,
Projectors, Laptops, PCs. | | Input Signals | Video: 1 Vp-p | | Horizontal & Vertical Sync : TTL
standard. 300kHz max. bandwidth | | Insertion Loss | Less than 3dB per pair over the frequency range |
| Video Signal Return Loss | -15dB max from DC to 60Mhz
| RJ45 Pin
Configuration: EIA 568B Wiring standard | R video (Red): Pin 1 (+), Pin 2 (-)
Balanced G video (Green): Pin 4 (+), Pin 5 (-) Balanced B video (Blue):
Pin 7 (+), Pin 8 (-) Balanced Horizontal Sync: Pin 3, Vertical Sync: Pin
6 | | Impedance
| Input : RGB 75 ohms
(DB15 HD) Unbalanced | Input : RGB 100 ohms (RJ45 shielded) Balanced |
| Output : RGB 100 ohms
(RJ45 shielded) Balanced | Output : RGB 75 ohms (DB15 HD) Unbalanced |
| Horizontal and vertical sync
: TTL standard | | Setting
Switch | 2-Stage Slide
Switch | 5-Stage
Dip Switch | | Transmission
Distance | 60 -135 meters
depend on image resolution | |
Link Cable | CAT5 / CAT5e
/ CAT6 / STP or UTP Cable | |
Temperature | Operation:
0 to 55 C, Storage: -20 TO 85 c, Humidity: up to 95% |
| Dimensions W x H x D mm | 110 x 77 x 26 |
|