![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: ADP31612
Product Description: USB 4 Port Hub
2.0 - Powered by Bus or Externally
Category: Electronic items
w/USBA, Electronic items w/USBB, and USB & FireWire
|  |
|
Features: - Fully compatible with USB 2.0 & USB 1.1
- Data
Transfer Rate: USB 1.1 OHCI 1.1 1.5Mbps, 12Mbps; USB 2.0 EHCI 480Mbps
- Supports up to 127 devices
- Supports Windows™
98/98SE/ME/2000/XP/Vista
Connectors: - 4 x Downstream Type A
USB ports
- 1 x Upstream Mini B USB port (Cable included to connect from here
to PC)
This unit does include a power adapter. We do have the ADP3168 which does not include the power adapter. If
the USB bus can supply enough current (If the total current of the four devices
does not exceed 450mA) a power adapter would not be necessary.
USB
Notes:- USB peripherals can connect either to a computer's port or to
a hub.
- If the computer doesn't have enough ports for all the peripherals, a
hub is necessary.
- Maximum length on individual cables is 5 Meters.
- No
terminators are needed on this bus.
- The A (flat) type port would be
considered the "out" port on a computer or hub.
- The B (square) type port
would be considered an "in" port on hubs or peripherals.
- A typical USB "out"
(Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes per second
for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of
peripherals to a controller is 63 (hubs needed when the computer runs out of
ports).
|
| Categories and Products Related
to: USB 4 Port Hub 2.0 - Powered by Bus or
Externally | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2010. All Rights
Reserved. |
