Features:- Fully compliant with USB 2.0
and 1.1
- Interface: 44-pin ATA/ATAPI to USB
- Data Transfer Rate: USB 1.1
OHCI 1.5Mbps, 12Mbps; USB 2.0 EHCI 480Mbps
- Length: USB Cable 1.5m; Power
Cable 1m
- One dual color LED (Active: orange/Power On: green)
- Fully Ultra
ATA/ATAPI compatible
- Supports maximum IDE/ATA data transfer rate of
100MB/sec
- Compliant to ATA/ATAPI-5 specifications and PCI 2.1
- Compliant
with Ultra ATA/33, ATA/66, ATA/100, IDE & ATAPI devices
- Powered from USB
port. Please Note: Some USB ports, specifically on notebook or laptop
computers, may not provide enough current for this. If working current is
insufficient, it offsets from external power through DC Jack (requires 5VDC,
Center=positive).
- Supports Windows™ 98/98SE/ME/2000/XP and MAC™ OS
9.x or 10
 The physical dimensions of the drive
needs to be at or less than the dimensions shown above in order for the drive
to fit in the enclosure. Maximum thickness is .375 inches or 3/8
inches.
USB Notes:- USB peripherals can connect either to a
computer's port or to a hub.
- If the computer doesn't have enough ports for
all the peripherals, a hub is necessary.
- Maximum length on individual cables
is 5 Meters.
- No terminators are needed on this bus.
- The A (flat) type
port would be considered the "out" port on a computer or hub.
- The B (square)
type port would be considered an "in" port on hubs or peripherals.
- A typical
USB "out" (Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes
per second, the maximum number of peripherals to a controller is 63 (hubs
needed when the computer runs out of ports).
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
