
![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: ADP3146
Product Description: Converter and Case (clear color) that Connects an IDE 3.5 inch Hard
Drive to a USB Port (Drive not included)
Category: Electronic items
w/USBA, USB & FireWire, USB, Converters, and Peripherals| List Price: $ | 130.30 |  | | Dealer Price: $
| #####.## |  | Product Weight:
3.4 |  |
|
Comes with a 50W power supply,
converts from USB to IDE. Other enclosures available;| ADP3146 | IDE to USB 3.5
Converter | | ADP3148 | IDE to
USB 5.25 Converter |
Special
Note: USB Drivers come with the operating system and have to be loaded when
the computer boots up. As a result, no USB devices can be used until after
boot up. It is not possible to boot from an external CD-ROM or hard drive
connected through a USB port. Also, if booting up requires a keystroke, the
keyboard connected through a USB port would not work for this. A keyboard would
need to be connected to the regular keyboard port for this.
USB Notes:- USB peripherals can connect either to a
computer's port or to a hub.
- If the computer doesn't have enough ports for
all the peripherals, a hub is necessary.
- Maximum length on individual cables
is 5 Meters.
- No terminators are needed on this bus.
- The A (flat) type
port would be considered the "out" port on a computer or hub.
- The B (square)
type port would be considered an "in" port on hubs or peripherals.
- A typical
USB "out" (Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes
per second, the maximum number of peripherals to a controller is 63 (hubs
needed when the computer runs out of ports).
|
| Categories and Products Related to: Converter
and Case (clear color) that Connects an IDE 3.5 inch Hard Drive to a USB Port
(Drive not included) | |
|
| E-mail
product page to a friend |



All contents
Copyright © 1996-2008. All Rights
Reserved. |