FEATURES
SPECIFICATIONS
The ADP3133 represents a
hardware solution to the problem of converting signals between two standards.
Data transfer can take place at up to 1200m (4000'), over four or two wire
cable for full or half duplex, respectively. The converters can handle any
RS-485/RS-422 device allowing it to function as a short haul modem or interface
converter. Request to send (RTS) selection allows up to 32 receivers to be set
up in a multidrop installation, making for a cost effective network
configuration.
Our ADP3135 does the same thing but has
isolators, for more information on the ADP3135, click
here.
 Features- Data Transmission Controlled by the
RTS Signal
- DCE/DTE
Selectable
- Point to
Point, Multidrop and Simplex/Duplex Link Selectable
- Four Wire Full Duplex / Two Wire
Half Duplex
- Compact
Size
 Specifications| Function | ADP3133 | ADP3135 | | Connectors | RS-232 | DB-25
Female | | RS485/RS422 |
RS-485 / RS-422 four terminal block | | RJ-11 | Grounding
Tab | | Switches | SW1 | DCE, DTE,
Monitor | DCE, DTE | | SW2 | TxON,
RxON | | T-RTS,
R-/RTS | | T-RTS,
RxON | | Power Consumption | DC 9V 150mA
(Max) | DC 9V 200mA (Max) | | Isolation
Protection | None | Up to 2000V
DC | | Cable Distance | 1200m (4000')
Max | | Data Rate | Up to
100K bps under 1200m (4,000') | | Case |
Plastic | | Weight |
60g | | Dimensions (L x W x H) | 74.5 x 54 x 18.5
mm |
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
