UPS Backup Power Supply 1400VA 950 Watts
Fenton
Technologies "The UPS Price Leader" PowerPal - Intelligent, Full-Featured
Line-Interactive UPS PowerPal is Fenton's intelligent, reliable, and
user-friendly power protection solution for computers and networks. Why
protect your valuable equipment and data with PowerPal? Check out our features below and you'll be convinced, PowerPal is
indeed a MUCH better value. To go directly to the technical specification chart at the bottom of the page, please
click here. To go directly to the runtime chart at the bottom of the page, please click
here. For a replacement battery, see the
ADP8253. PowerPal
Features ADP8203 (280 VA), ADP8213 (425 VA), ADP8221 (660 VA), ADP8222 (1000 VA), ADP8223 (1400 VA), and ADP8224 (1400 VA Rack Mount) - Every
PowerPal model has built-in voltage correction for brownout protection -
"boosts" low voltages and "bucks" high voltages, extends battery life, and
reduces stress on your electronic equipment. Don't be fooled by other UPS
companies' confusing product lines: APC's Back-UPS models and Tripp Lite's
various BC models do NOT provide voltage correction. For APC and Tripp Lite,
you have to at least buy the Back-UPS Pro or the OmniSmart in order to get this
valuable feature. If you compare Fenton to APC or Tripp Lite, make sure you
compare apples to apples!
- Every PowerPal model has dual RJ11/RJ45
surge protection ports to protect against surges coming through telephone/modem
or network
- Every PowerPal has a true RS232 interface port
- Every PowerPal is bundled with FREE smart software for UPS
monitoring and automatic safe shutdown of your computer system. The ADP8203 and ADP8213 VA models come
with software for Windows 3.1, Windows 95, Windows NT, and DOS. The ADP8221, ADP8222, and ADP8223
models come with software for all these operating systems plus Novell Netware!
- Fenton's unique SmartLoad intelligent overload and short circuit protection
feature works in both AC and battery operation modes - PowerPal warns
you of small overloads and shuts down during short circuit or high overload
conditions to protect you and your equipment and to help you avoid nuisance
fuse blows
- Battery test function and battery replacement indicator
- Site
wiring fault indicator alerts you to potentially hazardous electrical wiring
- User replaceable, hot-swappable batteries for convenient and economical
battery replacement (280/425/660 only)
- Smart electronic on/off switch lets
you turn on UPS with or without AC utility power available - PowerPal's
battery power is available whenever you need it. And the delayed off feature
helps prevent accidental turning off of the UPS
- 50/60 Hz. auto-sensing
- UL and cUL listed for safety and performance
- Up to $25,000 equipment
protection
- Additional features of models ADP8222,
ADP8223 and ADP8224:
- Four additional
visual indicators: boosting voltage, bucking voltage, load level percentage of
maximum load, battery charge level as a percentage of full charge
- Six
output receptacles
- Circuit breaker for convenient resetting instead of
replacing fuse when overload/short circuit
- Built-in cooling fan in rear of
UPS for optimal battery performance and runtime
- Typical application for
1000 VA is for multiple (two or maybe three) PC workstations, a big file
server, or just for long runtime on a smaller computer (also see Tele-UPS for
information about long runtime UPS products)
- Additional features of the ADP8224.
- 19" wide, 3 unit high rack-mount
configuration.
- Three interface ports to monitor multiple servers.
- Slot
for optional SNMP/HTTP management card.
- Runtime extendible with optional
battery bank.
SPECIFICATIONS
CHART | MODEL | ADP8203 | ADP8213 | ADP8221 | ADP8222 | ADP8223/ADP8224 |
|---|
| INPUT Voltage | 115 VAC | | Frequency | 50/60 Hz. auto-sensing | | OUTPUT | VA Rating | 280 | 425 | 660 | 1000 | 1400 | | Wattage | 180 | 270 | 420 | 670 | 950 | | Transfer Time | Two to four milliseconds (typical) | | Voltage Regulation | "Boost and buck"
automatic voltage correction increases output by 12.5% if input is 14 - 27%
below nominal and decreases output by 12.5% if input is 10 - 22.5% above
nominal | | Receptacles | 2 | 3 | 4 | 6 | 6 | | SURGE | Energy Rating | 320 joules instantaneous response - hot, ground, &
neutral | | Test Standard | IEEE-587
A & B | | Tel/Network | Dual
RJ11/45 surge protection port | | NOISE | Filtering | EMI/RFI full
time suppression | | Attenuation | Better than 45 dB @1 MHz for normal/common mode | | BATTERY | Type | Sealed, lead-acid
maintenance-free | | Recharge Time | Six hours to 90% charge (typical) | | PROTECTION | Under/Over Voltage | Switch to battery output when out of regulation
range | Overload/ Short Circuit | Fuse and current limited for utility and battery
modes | Fuse/ Circuit Breaker | 6.3 A 250 V T type | 9 A circuit
breaker | | Low Battery | Two stage
alarm, no battery drain after automatic cutoff | | Visual
Indicators | Normal, battery, overload, replace
battery, site wiring fault | Normal, battery, overload, replace
battery, site wiring fault, battery level, load level, boost voltage, and buck
voltage. | COMMUNICATION COM Port | Microprocessor-controlled DB9, RS232 & contact closure
signals | | MECHANICAL | Dimensions | 107x170x350mm | 107x170x385mm | 220x170x440 mm | 220x170x440 mm
(ADP8223) 457x133x200mm (ADP8224) | | Net Weight | 12 lbs. | 15.5 lbs. | 21
lbs. | 42 lbs. | 57 lbs. | | ENVIRONMENTAL | 0-40 degrees C, 0-90%
non-condensing, 3000 m max. elev. | | SAFETY
APPROVALS | UL, cUL, CE |
RUNTIME CHART All runtimes (given in
minutes) are approximate only and will vary depending on actual power draw of
connected equipment, age of UPS battery, and other variables. | ADP8203 | ADP8213 | ADP8221 | ADP8222 | ADP8223/ADP8224 |
|---|
| PC/Mac + 15" monitor | 5-10 | 10-20 | 20-30 | 30-60 | 60-120 | | PC/Mac +
17"/20" monitor | -- | 5-10 | 10-20 | 20-40 | 40-100 | | Heavily configured file server | -- | -- | 5-15 | 15-30 | 30-60 |
|