Multi fiber cable assemblies, opti-jack, opti-plug, MTRJ, FDDI, Escon, Biconic, cable manufacturing services

Multi Fiber Cable Assemblies
Vendor Specific Choices will be Subject to Inventory

To illustrate the diversity of this product category and facilitate the ordering process, the table below shows the structure of a Typical Part Number FN6012ASCSC-FP and its possible variations.

Specifically,
Row 1 shows the Part Number.
Row 2 describes the Variables that make up the Part Number.
Row 3 lists the possible Values for each variable.

012

Breakout

Fiber Used

# of Fibers

Jacket

First Connector (only one if the same connector is used)

Second Connector

N = Non-Breakout
B = Breakout

S = Single Mode
5 = 50/125 Multi Mode
6 = 62.5/125 multi Mode
1 = 100/140 Multi Mode

02, 04, 06, 08, 12, 24, 36 thru 288
(Breakout & Nonbreak out Only)

A = PVC
B = Plenum

BI = Biconic
BN = Mini BNC
ES = Escon
FC = FC
FD = FDDI
LC = LC
MTN = MTRJ
OJ = OPTI-JACK
OP = OPTI-PLUG
SC = SC Ceramic
SCC = SC Polymer
SM5 = SMA 905
SM6 = SMA 906
ST = ST Ceramic
STC = ST Polymer
STS = ST Stainless Steel
B = Blunt

SINGLE MODE ONLY
FCA = FC Angle Polish
FCU = FC Ultra Polish
LCU = LC Simplex Ultra Polish
SCA = SC Angle Polish
SCU = SC Ultra Polish
STU = ST Ultra Polish
Vendor Specific Choices will be subject to Availability
B = Breakout
N = Non-Breakout

F = FURCATIO N TUBING
NON-BREA KOUT ONLY

P = PULLING EYE FIBER

1. NON-BREAKOUT or BREAKOUT
2. NUMBER OF FIBERS (2 thru 144)
3. MODE (SINGLE-MODE or [MULTIMODE 62.5/125, 50/125 or 100/140])?

4. CONNECTORS (SC, ST ...etc.)?
5. JACKET (PVC or PLENUM)?
6. LENGTH (FEET or METERS)?
7. FURCATION TUBING (NON-BREAKOUT ONLY)?
8. PULLING EYE FOR EASE OF INSTALLATION?