 |
All Avaya/Lucent Fiber Patch Cords Part Number Breakdown
To illustrate the diversity of this product category and facilitate the ordering process, the table below shows the structure of a Typical Part Number
FLD6AST010F and its possible variations.Specifically,
Row 1 shows the Part Number.
Row 2 describes the Variables that make up the Part Number.
Row 3 lists the possible Values for each variable.
FL |
D |
6 |
A |
ST |
|
|
|
010 |
F |
|
Cordage Used |
Fiber Used |
Jacket |
First Connector
|
Second Connector |
(If Not Required,
Omit) |
(If Not Required,
Omit) |
Length |
Unit of Measure |
L=All Lucent |
D = Duplex
S = Simplex
MS = Minicord Simplex
MD = Minicord Duplex |
6 = 62.5/125 Multimode
S = Singlemode |
A = PVC
B = Plenum |
LC = LC
LCD = LC Duplex
LCU = LC Ultra
SC = SC Ceramic
SCD = SC Ceramic Duplex
SCU = SC Ultra
SCUD
= SC Ultra Duplex
ST = STII+
STU = STII+ Ultra
|
LC = LC
LCD = LC Duplex
LCU = LC Ultra
SC = SC Ceramic
SCD = SC Ceramic Duplex
SCU = SC Ultra
SCUD
= SC Ultra Duplex
ST = STII+
STU = STII+ Ultra |
L = Label
S = Shrink |
L = Label
S = Shrink |
001-999 |
F=Feet
M=Meters
|
MCC'S FIBER ASSEMBLIES ARE LOSS GUARANTEED TO (-.5 dB) OR LESS PER MATED PAIR.  FIBER OPTIC MULTIMODE CHECK LIST:
1. SIMPLEX or DUPLEX
2. MODE (MULTIMODE 62.5/125, 50/125 or 100/140)?
3. CONNECTOR TYPE (SC, FDDI, ST ...etc.)?
4. CONNECTORS (Composite Polymer or Ceramic)?
 5. JACKET (PVC or PLENUM)?
6. LENGTH (ALL LENGTHS IN FEET or METERS)? FIBER OPTIC SINGLE-MODE CHECK LIST: 1. SIMPLEX or DUPLEX
2. CONNECTORS (SC, FDDI, ST ...etc.)?
3. SINGLE MODE POLISH (STANDARD, APC, UPC or SPC)?
4. JACKET (PVC or PLENUM)?
5. LENGTH (ALL LENGTHS IN FEET or METERS)?  LC Fiber Patch Cords
Example Part Number:
FLD6ALCDST-??? • The LC Solution is Bellcore, ANSI/EIA/TIA and IEC compliant and SYSTIMAXSCS approved. For 900 Micron and 1.6 MM fiber both Simplex and Duplex. LC CHECK LIST: 1. MODE (MULTIMODE 62.5/125, SINGLE MODE)?
2. SECOND CONNECTOR TYPE (SC, ST, ...etc.)?
3. JACKET (PVC or PLENUM)?
4. LENGTH (ALL LENGTHS IN FEET or METERS)? |
