Listed below is our standard product packaging guide for you to utilize when ordering ICC, Inc. Products. This should be utilized as a guide to aid you in the purchasing of our product only, and is subject to changes by the ICC, Inc. management.

Consult your ICC representative or the factory for the current standard packaging information.

STANDARD PACKAGING GUIDE:

9,15, & 25 Position Connectors @ 500 Pcs. Per Bag
37 Position Connectors @ 100 Pcs. Per Bag
50 Position Connectors @ 100 Pcs. Per Bag

10,000 Pcs. Per Reel On D-Sub Contacts
4,000 Pcs. Per Reel On Three More Contacts
1,000 Pcs. Per Bag On Loose Piece Contacts

Solder Cup Connectors 9, 15, 25 Position 50 Pcs Per Tray
Solder Cup Connectors 37, 50 Position 40 Pcs Per Tray

All Dip Solder Connectors Are Packaged 100 Pcs. Per Box
(Regardless Of Positions)

9 Position Metal Cable Clamps @ 300 Sets Per Box
15 & 25 Position Metal Cable Clamps @ 250 Sets Per Box
37 Position Metal Cable Clamps @ 100 Sets Per Box

15 Position Ethernet Backshells @ 250 Sets Per Box

9 Position Plastic Cable Clamps @ 500 Pcs. Per Box
15 Position Plastic Cable Clamps @ 500 Pcs. Per Box
25 Position Plastic Cable Clamps @ 500 Pcs. Per Box
37 Position Plastic Cable Clamps @ 100 Pcs. Per Box

Male And Female Screwlock Assemblies @ 500 Sets Per Bag
Female Barrel Adaptor @ 100 Pc Increments
Long Thumb Screws @ 100 Pc Increments

For V.35 rack & panel connector and hardware packaging, Consult factory

Alternate packaging can be provided at an additional charge

Please use this guide for placing all your new orders in the Above incremental quantities.

minimum order of $100.00 required for factory direct
Purchases. Confirming purchase orders must be submitted.