PATCH PANELS
Visit Our On-Line Store The panels exceed all requirements as specified by EIA/TIA 568, 568A
&;TSB-40A standards for connecting hardware performance to 100MHz. The patch panels are constructed of .125" aluminum with a durable, textured black polycarbonate overlay screened
with port numbers and labeling areas. The PCB mounting method provides superior rigidity which is especially important during termination of the 110 connector using a five pair impact tool.
Specialized PCB assembly processing techniques and design offer the highest reliability. Rear insulators protect the PCB and provide ID numbers and labeling area. RACK MOUNT CAT 5 PATCH PANELS
CCC PART # |
DESCRIPTION |
SIZE |
|
PB-128L5-110 |
12 X RJ45-110, 568B (89B BRACKET) |
|
PP-128L5-110 |
12 X RJ45-110, 568B |
19" X 1.75" |
PP-248L5-110 |
24 X RJ45-110, 568B |
19' X 1.75" |
PP-328L5-110 |
32 X RJ45-110,568B |
19" X 3.5" |
PP-488L5-110 |
48 X RJ45-110, 568B |
19" X 3.5" |
PP-648L5-110 |
64 X RJ45-110, 568B |
19" X 7.0" |
PP-968L5-110 |
96 X RJ45-110, 568B |
19" X 7.0" |
PP-1208L5-110 |
120 X RJ45-110, 568B |
19" X 7.0" |
We also stock racks to mount your patch panels on, plus a wide range of tools to help with your installation. WALL MOUNT CAT 5 PATCH PANELS
|
CCC PART # |
DESCRIPTION |
JP12-845-EB5 |
12 X RJ45-110, 568B W/O LEGS |
JP12-845-EB5L |
12 X RJ45 568B W/LEGS |
JP24-845-EB5 |
24 X RJ45, 568B W/O LEGS |
JP24-845-EB5L |
24 X RJ45, 568B W/LEGS |
JP36-845-EB5 |
36 X RJ45, 568B W/O LEGS |
JP36-845-EB5L |
36 X RJ45, 568B, W/LEGS |
STRAIN RELIEF BRACKET - Strain relief bar mounts to the back of the patch panel to provide
maximum strain relief and to maintain the bend radius for Category 5 cables. It helps to ensure that the twist is maintained as close to the point of termination as possible.ADD NUMBER STIPS -
Port number stips are available to consecutively number patch panels. The strips have adhesive backing for easy application.
CCC PART # |
DESCRIPTION |
|
CMB-200 |
FITS ON 19" PANEL, 2.0" DEEP |
CMB-350 |
FITS ON 19" PANEL, 3.5" DEEP |
To complete your installation we can also provide patch cables, both RJ45 and 110 connectors. HINGED WALL MOUNT BRACKETS Hinged wall mount brackets are designed for 19" patch panels and are 6" deep. Brackets are
provided with holes on EIA spacing for mounting one or more panels and are supplied with 10-32
mounting hardware. Each bracket has slots on rear for wall mounting with hinges on the left or right.
|
CCC PART # |
HEIGHT |
PATCH PANEL SIZE |
HWMB-1.75 |
1.75" |
12 or 24 PORT |
HWMB-3.5 |
3.5" |
32 or 48 PORT |
HWMB-5.25 |
5.25' |
12 or 24 AND 32 or 48 PORT |
HWMB-7 |
7" |
64 or 96 PORT |
HWMB-8.75 |
8.75" |
120 PORT |
We also offer an extensive range of
Fiber Optic Enclosures (wall & rack mount), and Fiber Cable both single mode and multi-mode. |
