Fiber Cables Overview Visit Our On-Line Store Fiber Optic Cables | Pulling Eye Assemblies | Fiber Enclosures | Innerduct | Bulk Fiber | Attenuators | Stock Fiber Jumpers /Patch Cords
|Multi Fiber Trunk Cables |
FIBER OPTIC CABLES
  Communication Cable Company manufactures fiber patch cords using the highest quality cable and
connectors. All assemblies are tested to ensure low db loss. We stock an extensive range of
standard length cables for your convenience. Same day shipment is available for many patch cables!
Save time and money by purchasing multi-fiber assembled cables in custom lengths and eliminate the need for field assembly. Communication Cable Company manufactures cables using any
combination of connectors and cable types. The choice is yours, call with your specific requirements. Test data is available upon request.
ST |
|
Cylindrical with twist lock coupling, 2.5 mm keyed ferrule. (For both short distance applications and long line
systems). |
SC |
|
Square, keyed connector with push- pull mating, 2.5mm ferrule &molded housing for protection. |
FDDI |
|
Duplex connector, with fixed shroud, keyed. |
FC |
|
Cylindrical with metal coupling and keyed sleeve, 2.5mm ceramic ferrule. |
BICONIC |
|
Conical ferrule provides low insertion loss |
ESCON |
|
Duplex connector, with retractable shroud. (For IBM ESCON or compatible systems). |
SMA905 |
|
3.2mm ferrule. |
SMA906 |
|
3.2mm ferrule, recessed tip. |
MINI BNC |
|
Cylindrical with twist lock coupling, 2.5 mm metal ferrule. |
MTRJ |
|
|
D4 |
|
Ceramic connector with cylindrical metal coupling nut, 2.0mm ferrule, keyed |
PULLING EYE ASSEMBLIES
|
Multi-stranded cable assemblies complete with a pulling eye are available for easy installation. Simply pull
the cable via the pulling eye and then cut away the sheath to reveal the pre-terminated connectors of your choice - ready to plug and play.
More information on Multi-Fiber Trunk Cables. |
FIBER ATTENUATORS
Fiber attenuators are used to control the power level of optical signals in optical communication at the
output of Light Sources, E/O Converters, and also for the testing of linearity or dynamic range of Photosensors, Photodetectors, etc. Fiber type attenuators becomes popular because it is
advantageous with regard to adaptability to a receptacle structure and spliceability to a transmission fiber. Some of the features of Attenuators are -
Precise Attenuation Value - Environmental Stable and Reliable - Excellent Return Loss - Bi-Directional Non Air Gap.For More Information on
Fiber Attenuators click here. FIBER OPTIC ENCLOSURES Communication Cable carries a variety of enclosures for fiber distribution. Whether you need an
enclosure for termination, splicing, or both, Communication Cable and Champion Products provide you with a quality solution!
Corrosion resistant 16 gauge galvanized steel with powder coat paint finish for superior resistance to
chips and scratches, padlock hasp for extra security. The units are stackable for future expansion.
Cables enter from top or bottom, internal brackets are provided to manage cable slack and to prevent damage to fibers. Units provide protection in LAN or Data applications.
WALL MOUNT
|
For wall mount applications the CFD100LIU will protect up to twelve (12) of your fiber terminations inside
a rugged 16 gauge mill galvanized steel shell. Cable management and strain relief are provided by internal loops and brackets. Cable entry is facilitated by a top or
bottom entry port which transforms into a slot for fast and easy tie down. For up to twenty-four(24) fiber terminations, order the CFD200LIU. |
Adapter plates for the CFD100 and 200LIU follow this format: CFD100-PXXX, where the first
'X' gets replaced with an 'N' for unloaded, or a 'C' for a loaded plate and the next two 'XX' get replaced with the two character abbreviation for the coupler style desired,
found at right----> |
ST = 'ST'SMA = 'SM' FC = 'FC' Biconic = 'BA' D-4 = 'D4' |
For medium fiber counts in a splice and terminate, or terminate-only application, we
recommend the CFD20 series. The dual door design provides extra security and protection featuring a padlock hasp and bolt entry on the facilities door. |
|
The above enclosures are extremely flexible, they can be loaded with your choice of connectors and
are expandable to meet future growth. The adapters are held in a 6 port panel which easily slots into the enclosure
CCC PART # |
CAPACITY |
CFD100-LIU |
12 ADAPTERS (2 PANELS) |
CFD200-LIU |
24 ADAPTER (4 PANELS) |
FOI-12-MHE |
12 ADAPTER (2 PANELS) |
FOI-36-MHE |
36 ADAPTER(6 PANELS) |
CFD100P-ST-A |
6 PORT PANEL LOADED WITH 6 ST ADAPTERS |
CFD100P-NST |
6 PORT PANEL WITHOUT ADAPTERS |
CFD100P |
BLANKING PANEL |
Available connector types: ST, SC, FC, SMA & BICONIC
RACK MOUNT
|
For low security rack mount installations the CFD4024 provides an economical and craft-friendly solution.
It mounts flush in a 19" rack and features a rear tray to facilitate cable management, splicing and termination as well as tie down slots and fiber looping guides to
maintain the proper bend radius. |
CCC PART # |
DESCRIPTION |
CFD4024-NST |
24 PORT DISTRIBUTION PANEL |
CFD-4024-NST-K |
24 PORT DISTRIBUTION PANEL WITH LID |
CFD4024-L |
COVER FOR CFD4024-NST |
The CFD90 series provides an excellent rack mount location for the connection of pre-terminated cables,
splicing applications or direct termination of fibers in one enclosure. Each has secure cable tie bars and internal routing guides, a slide tray to access adapters and
splices, and a clear Lexan front door. The CFD90 series enclosures all have reversible mounting tabs for 19" or 23" mounting. |
|
CFD904 & CFD906 has secure cable tie bars and internal cable routing guides for ease of handling
entrance cable. A completely removable slide-out tray allows total access to adapters and splice trays. Can be mounted on 19" or 23" racks.
|
CCC PART # |
CAPACITY |
CFD904 |
32 ADAPTER (4 PANELS) |
CFD906 |
48 ADAPTER (6 PANELS) |
CFD906P-ST-A |
6 PORT PANEL WITH ST ADAPTERS |
CFD908P-ST-A |
8 PORT PANEL WITH ST ADAPTERS |
CFD906P-NST |
6 PORT PANEL W/O ADAPTERS |
|
CFD908P-NST |
8 PORT PANEL W/O ADAPTERS |
Available connector types: ST, SC, FC, SMA & BICONIC
CCC PART # |
CAPACITY |
|
CFD8012 |
72 PORT PANEL (12 PANELS) |
CFD806P-ST-A |
6 PORT PANEL WITH ST ADAPTERS |
CFD806-PNST |
8 PORT PANEL WITH OUT ADAPTERS |
Available connector types: ST, SC, FC, SMA & BICONIC
All of the above enclosures feature a powder coat paint finish for excellent resistance to corrosion, dents and scratches.
Need a rack? Click on this link to see some of the quality racks, cabinets and LAN furniture
that Communication Cable supplies.
INNERDUCT
Supplied in 250' and 500' boxes. Custom lengths available for a nominal cut charge.
|
INNERDUCT1.00 |
HDPE WITH PULL ROPE |
INNERDUCT1.25 |
HDPE WITH PULL ROPE |
INNERDUCT1.50 |
HDPE WITH PULL ROPE |
INNRDUCT1.00P |
PLENUM WITH PULL TAPE |
INNRDUCT1.50P |
PLENUM WITH PULL TAPE |
BULK FIBER OPTIC CABLE
Multimode fiber optic cable: This cable is used in most LAN applications, and has many other uses as
well. This class of cable has a number of different core diameters, the most common being 62.5/125 micron fiber. Other sizes are available by special order.
Singlemode fiber optic cable:
This is the cable of choice in "longhaul" applications, such as long distance telephone lines, long runs between buildings, or in high speed applications like "sonet" rings. The fiber diameter is 8.5/125 microns. See our
Singlemode
Page for a currently available list of bulk singlemode discounted cable. |
|
Fiber cables come packaged in many different styles to suit a variety of needs from direct burial
underground cables and aerial cables with messenger wire to inside plenum cables, and special "mil-spec" cables for severe duty or disaster recovery.
The following categories of cable give a rough idea of the many styles of fiber available, and some of the considerations involved in choosing the "right fiber" for your application.
|
