Part Number: ADP5126 Product Description: Adapt any standard VGA monitor to accept a Composite Sync (for SUN Workstations) Category: Video Converters Price: $132.25 Product Weight: 0.5 lbs Full Size Picture This adapter is designed to split the Composite sync so that a workstation that only has the composite sync signal (no H/V signal) can be connected to a VGA monitor that only supports the H/V signal. Some older SUN and MAC workstations have the composite sync and don't provide the H/V signal. This adapter was designed to allow a VGA monitor work with those workstations. This adapter would not be necessary for newer SUN and MAC workstations that provide the H/V signals. For newer MAC workstations, use M5247 or M5250 instead. For newer SUN workstations, use M5297 instead. For the older workstations, since this adapter has the DH15 input, a second adapter would be needed to go with this one. The M5250 could be used for the MAC workstation. A special adapter would need to be ordered for the SUN workstation. Sync Input: Composite Input pin 13 Range: 30 to 150KHz TTL Levels Sync Outputs: Vertical Output pin 14 Range: As input TTL Levels Composite Output pin 13 H and V combined TTL Levels Connectors: Input DH15 Male Output DH15 Female Power: No external power Required Direct Input pin 9 (If available) Requires DDC-2 compliant card +5.0VDC Indirect Power derived from sync signal inputs Physical: Size 2.05"L x 1.38"W x 0.88"H Weight 33gm/1.2oz Categories and Products Related to: Adapt any standard VGA monitor to accept a Composite Sync (for SUN Workstations) Click Heading for Related products > Main Product Categories > D-Style > DH15 > Cables w/DH15 > ADP5126 > Accessories > Input Devices > Other > > Converters/Extenders > Converters > Video > > Accessories > Converters > Video > > Cables > PC > Monitor > > Computer Cables > PC > Monitor > E-mail product page to a friend All contents Copyright © 1996-2008. All Rights Reserved.