Part Number:
ADP3148
Product Description:
Converter and Case that Connects an IDE 5.25 inch Hard Drive to a USB 2.0 Port (Drive not included)
Category: USB Converters Cables
Price: $111.87
Product Weight: 3.95 lbs
|

Full Size Picture
|
Comes with a 50W power supply, converts from USB to IDE.
Other enclosures available;| ADP3146 | IDE to USB 3.5
Converter | | ADP3148 | IDE to USB 5.25
Converter |
Special Note:
USB Drivers come with the operating system and have to be loaded when the
computer boots up. As a result, no USB devices can be used until after boot
up. It is not possible to boot from an external CD-ROM or hard drive
connected through a USB port. Also, if booting up requires a keystroke, the
keyboard connected through a USB port would not work for this. A keyboard would
need to be connected to the regular keyboard port for
this.
USB Notes:- USB peripherals can connect either
to a computer's port or to a hub.
- If the computer doesn't have enough ports
for all the peripherals, a hub is necessary.
- Maximum length on individual
cables is 5 Meters.
- No terminators are needed on this bus.
- The A (flat)
type port would be considered the "out" port on a computer or hub.
- The B
(square) type port would be considered an "in" port on hubs or
peripherals.
- A typical USB "out" (Type-A) port can provide up to
500mA.
- The speed is 12 Megabytes per second for USB 1.1 or 480 Megabytes per
second for USB 2.0, the maximum number of peripherals to a controller is 63
(hubs needed when the computer runs out of
ports).
| Categories and Products Related to: Converter
and Case that Connects an IDE 5.25 inch Hard Drive to a USB 2.0 Port (Drive not
included) | | E-mail
product page to a friend
|
All contents Copyright © 1996-2009. All Rights Reserved.
|