Part Number:
ADP3143
Product Description:
USB to PS2 Keyboard and Mouse
Category: USB Converters Keyboards Mice
Price: $35.02
Product Weight: 0.25 lbs
|

Full Size Picture
|
Features Specs Universal Serial Bus (USB) port technology has emerged in response to
the proliferation of external peripheral devices (scanners, digital cameras,
removable drives, etc.), that are increasingly being connected to the latest
generation of PCs. USB behaves in a similar fashion to conventional bus ports
(i.e., serial, parallel, PS/2), but since it does not require any IRQs, more
devices can be attached to the system, and the problem of IRQ conflict is
eliminated. The ADP3143 PS/2 to USB Keyboard and
Mouse interface converter provides the means for PS/2 type keyboards and mice
to connect to a PC, notebook, laptop, or hand held computing device that
supports the USB specification via the USB bus instead of using conventional
bus technology. An advantage of this for notebooks, for example, is that now an
external mouse and keyboard can be connected at the same time without causing
conflicts. The ADP3143 comes with two standard 6 pin
mini DIN female connectors for the PS/2 keyboard and PS/2 mouse to plug into
and has an attached 30 cm USB cable with a type A plug for connection to the
PC's USB port, or to a USB hub. For further convenience
- especially to users of notebooks, laptops, and hand held devices - the
ADP3143 adapter derives its operating power from the Universal Serial Bus
itself, so no bulky external power supply needs to be taken along. And because
it is a USB Specification compliant device, the ADP3143 supports energy-saving
suspend and resume operations. Features- Works with any USB compliant
System
- PS/2 Keyboard and PS/2 Mouse
Ports
- Supports wheel mice
- USB
Powered
Specifications | Function | Specification | | Connectors | USB | Type A Plug | | PS/2 | 1 Keyboard; 1
Mouse | | Function Switches | 1 Remote
Wake Up Push-button | | Cable
Length | 30 cm | | Platforms | Windows™ 98/2000/ME; Mac™ OS
8.6+ | | Transfer
Rate | 12Mbps | | USB Specs | 1.0 and 1.1 compatible | | Power Mode | Bus Powered | | Casing | Plastic | | Weight | 80g | | Dimensions (L x W x H) | 82 x
55 x 23 mm | Special Note: USB
Drivers come with the operating system and have to be loaded when the computer
boots up. As a result, no USB devices can be used until after boot up.
It is not possible to boot from an external CD-ROM or hard drive connected
through a USB port. Also, if booting up requires a keystroke, the keyboard
connected through a USB port would not work for this. A keyboard would need to
be connected to the regular keyboard port for this.
USB
Notes:- USB peripherals can connect either to a computer's port or to
a hub.
- If the computer doesn't have enough ports for all the peripherals, a
hub is necessary.
- Maximum length on individual cables is 5 Meters.
- No
terminators are needed on this bus.
- The A (flat) type port would be
considered the "out" port on a computer or hub.
- The B (square) type port
would be considered an "in" port on hubs or peripherals.
- A typical USB "out"
(Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes per second,
the maximum number of peripherals to a controller is 63 (hubs needed when the
computer runs out of ports).
| Categories and Products Related
to: USB to PS2 Keyboard and Mouse | | E-mail
product page to a friend
|
All contents Copyright © 1996-2009. All Rights Reserved.
|