Part Number: ADP3182
Type: USB Cables
Description:
"USB to USB Network adapter, network PCs for file and printer sharing through USB ports"
The ADP3182 allows you to easily construct networking
via USB port. Combined with our M2404 (sold separately),
this Smart-Net cable does more than just file-sharing, let you create your PCs
into networking, and share all the source such as files, printers, peripheral
equipment and more.
FEATURES- USB host to host communication
- Single cable solution for network communication
- Standard Windows™
Explorer user interface
- Maximum Data transfer rate: Over 5 Mbps
- Construct USB Network up to 17 PCs
- Power management: current reduces to
450u (A at suspend mode)
- Sharing resources, such as Printers, CD-ROMs,
Modems, Scanners, etc.
- Support TCP/IP, NetBEUI, IPX/SPX protocols
- Full
NDIS driver implementation
- No external power needed
- Compliant with USB
specification version 1.1
- USB full speed connection
- Support
Windows™ 98
- Hot PnP for easy use
- Suitable for SOHO and mobile
network environment
SYSTEM REQUIREMENTS- Intel 486DX4-100 MHz CPU or
higher
- One standard USB port (4-pin)
- Windows™ 98 or
newer
USB Notes:- USB peripherals can connect either to
a computer's port or to a hub.
- If the computer doesn't have enough ports for
all the peripherals, a hub is necessary.
- Maximum length on individual cables
is 5 Meters.
- No terminators are needed on this bus.
- The A (flat) type
port would be considered the "out" port on a computer or hub.
- The B (square)
type port would be considered an "in" port on hubs or peripherals.
- A typical
USB "out" (Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes
per second for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum
number of peripherals to a controller is 63 (hubs needed when the computer runs
out of ports).
| Categories and Products Related to: USB to USB
Network adapter, network PCs for file and printer sharing through USB
ports | |
Price:
$60.86
|
