Part Number: ADP3164 Description: "USB 5 Port Internal Hub, fits in the 5-1/4 inch drive bay on a PC" Category: USB Hubs ADP3163 Price: $37.20

Full Size Picture

Comes with a 3 foot cable that goes inside, through the back and into a USB port on the back of the computer. Converts the one port on the back of the computer to five ports on the front.

Fits in a 3-1/2" drive bay, or with the use of the included adapter, in a 5-1/4" bay.

Key Features

• Fully compliant with USB Specifications 1.0 & 1.1
• Plug and play compatible
• 5 downstream port with over-current detection and protection per port
• Portable and Daisy Chainable
• Two power source modes (Self-Power and Bus-Power)
• has the same small power connector as a 3-1/2" floppy drive
• Up to 12Mbps bandwidth to USB device
• Each port supports 1.5Mbps and 12Mbps (for low speed/full speed devices)
• Supports all USB devices: Keyboard, Mouse, Monitor, Modem, Scanner, Printer, etc.

• USB peripherals can connect either to a computer's port or to a hub.
• If the computer doesn't have enough ports for all the peripherals, a hub is necessary.
• Maximum length on individual cables is 5 Meters.
• No terminators are needed on this bus.
• The A (flat) type port would be considered the "out" port on a computer or hub.
• The B (square) type port would be considered an "in" port on hubs or peripherals.
• A typical USB "out" (Type-A) port can provide up to 500mA.
• The speed is 12 Megabytes per second for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of peripherals to a controller is 63 (hubs needed when the computer runs out of ports).