• Standards:
    IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX
    IEEE 802.3z/ab 1000Base-T
    IEEE 802.3x full-duplex flow control,
  • Connectors / Slot:
    P1 — RJ-45/SFP Slot *
    P2 — SFP Slot with 1000Base-SX Multi-Mode Duplex-LC Module
    [ * Note:  Dual-Media Port-1 can only use either RJ-45 or SFP slot, but not both at the same time. ]
  • Data Transfer Rate:
    10/100/1000Mbps (auto-negotiation or forced mode) for TP
    1000Mbps for fiber
  • Cable / Max Distance:
    50/125µm Multi-Mode fiber, up to 500m (400MHz-Km) or 550m (500MHz-Km)
    62.5/125µm Multi-Mode fiber, up to 220m (160MHz-Km) or 275m (200MHz-Km)
    9/125µm Single-Mode fiber, up to 10~50km (SFP Module dependent)
    Category 5e or better UTP, up to 100m for 1000Base-T
    Category 5 or better UTP, up to 100m for 100Base-TX
    Category 3 or better UTP, up to 100m for 10Base-T
  • Duplex-Mode:
    Full-Duplex for 1000Base-SX/LX/T
    Full-/Half-Duplex (auto-sense) for 10/100Base-TX
  • LEDs:
    Unit — PWR (Power)
    P1 — SFP LNK/ACT (Link/Activity)
    P1 — TP LNK/ACT (Link/Activity)
    P1 — TP SPD (Speed for 10/100/1000Mbps)
    [ Green for 1000Mbps, Amber for 100Mbps, OFF for 10Mbps ]
    P2 — SFP LNK/ACT (Link/Activity)
  • Power Requirement:  0.9A up @ +5VDC
  • Power Consumption:  3.6W
  • Ambient Temperature:  0° to 40° C
  • Humidity:  5% to 90%
  • Dimensions:  140.7 x 87.7 x 29.4mm (H x W x D)
  • Emission and Safety Regulations:
    FCC Part 15 Class A & CE Mark Approval
  • Link Fault Pass-Through (LFP)
    With LFP enabled (selectable by DIP-Switch at rear panel), if any segment cable(s) is/are broken, both ports in each converter will be turned OFF, i.e. no Link LED.  If all segment cables are connected good, both ports in each converter will be turned ON, i.e. Link LED.
Categories and Products Related to: 1GB-FX Fiber <> 10Base-T/100Base-TX/1GB-TX RJ45 Ethernet ™ Converter
Click Heading for Related products >Main Product Categories>Modular >MP08 >Electronic items w/MP08 >NEA0362
>Ethernet™ >Converter, >100Base TX >
>Ethernet™ >Converter, >Fiber Optic >
>Ethernet™ >Transceivers >100Base TX >
>Ethernet™ >Transceivers >Fiber Optic >

Category: LAN Ethernet Converter MP08 100Base Fiber Optic

Part Number: NEA0362 .....

Price: $387.40


All contents Copyright . All Rights Reserved.
jewelry boxes
stats counter