Active Adapters, Converters, Buffers, Boosters or
Extenders with the DB09
|Categories and Products Related to: Active
Adapters, Converters, Buffers, Boosters or Extenders with the
item under Active Adapters, Converters, Buffers, Boosters or Extenders with the
USB to RS232 Serial Converter
to Serial Converter
This cable converts USB Signals to RS-232 signals,
allowing serial devices such as modems and POS systems to work in a USB
environment. In situations where serial devices must be connected to the
PC host, this cable allows the devices to connect to the PC's USB port, freeing
the few COM ports available on your PC for use in other applications like data
acquisition, PLC monitoring and instrument control.
- Product Features
(Universal Serial Bus) Rev. 1.1 compliant (or higher)
- Supports RS-232 serial interface
Transmission of up to 230400 bps
- Length: 1.5m
- Supports Windows™ 2000/XP/Server 2003/Vista
- System Requirements
- IBM™ compatible 486DX4-100 MHz or higher
- Available USB port
peripherals can connect either to a computer's port or to a hub.
- If the
computer doesn't have enough ports for all the peripherals, a hub is
- Maximum length on individual cables is 5 Meters.
terminators are needed on this bus.
- The A (flat) type port would be
considered the "out" port on a computer or hub.
- The B (square) type port
would be considered an "in" port on hubs or peripherals.
- A typical USB "out"
(Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes per second
for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of
peripherals to a controller is 63 (hubs needed when the computer runs out of
contents Copyright © . All Rights