   |
Active Adapters, Converters, Buffers, Boosters or
Extenders with the DB09
DB09M |
DB09F |
|
|
|
| Categories and Products Related to: Active
Adapters, Converters, Buffers, Boosters or Extenders with the
DB09 | |
|
Featured
item under Active Adapters, Converters, Buffers, Boosters or Extenders with the
DB09
USB to RS232 Serial Converter
- USB to Serial Converter
This cable converts USB
Signals to RS-232 signals, allowing serial devices such as modems and POS
systems to work in a USB environment. In situations where serial devices must
be connected to the PC host, this cable allows the devices to connect to
the PC's USB port, freeing the few COM ports available on your PC for use in
other applications like data acquisition, PLC monitoring and instrument
control.
- Product
Features
- USB (Universal Serial Bus) Rev. 1.1
compliant (or higher)
- Supports RS-232 serial
interface
- Serial Transmission of up to 230400
bps
- Length: 1.5m
- Supports
Windows™ 2000/XP/Server 2003/Vista
- System Requirements
- IBM™
compatible 486DX4-100 MHz or higher
- Available USB
port
- Windows™ 2000/XP/Server 2003/Vista
USB Notes:- USB peripherals can connect either to
a computer's port or to a hub.
- If the computer doesn't have enough ports for
all the peripherals, a hub is necessary.
- Maximum length on individual cables
is 5 Meters.
- No terminators are needed on this bus.
- The A (flat) type
port would be considered the "out" port on a computer or hub.
- The B (square)
type port would be considered an "in" port on hubs or peripherals.
- A typical
USB "out" (Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes
per second, the maximum number of peripherals to a controller is 63 (hubs
needed when the computer runs out of ports).
|
All contents Copyright © 1996-2009. All Rights
Reserved. |
