USB Printer Cables - Canada, Ontario Cable Assembly Manufacturing Company

Printer Cables, USB Cables, IEEE-1284 Cables

We are one of the leading manufacturers of cables and adapters in the world and provide products for some of the leading computer and communications hardware suppliers. We build all our products to the highest quality standards and to the full satisfaction of our customers, while maintaining a very competitive price structure.

Please call on us for any of the following:

USB Printer Cables
USB To Parallel Printer Cable
Parallel Centronics Printer Cables
Printer Cable Adapters
USB 2.0 Printer Cables
Serial Printer Cable
USB To Parallel Printer Adapter Cable
IEEE 1284 Printer Cable
Splitter For Printer Cable
Computer to Printer Parallel Cable
50-pin Printer Cable
Printer Power Cable
USB to Serial Printer Cable

Traditional IEEE1284 Cable Types:

Type A Male to Type A Male
Type A Male to Type A Female
Type A Male to Type B Plug
Type A Male to Type C Plug
Type B Plug to Type C Plug
Type C Plug to Type C Plug

Other Parallel Cables:

IBM printer with thumb screws, 19 conductor
IBM printer fully loaded with thumb screws
36 pin centronics, male/male
36 pin centronics male/female extension

The IEEE-1284 standard was created because there existed no defined standard for bi -directional parallel communications between personal computers and printing peripherals. Pre-existing methods utilized a wide variety of hardware and software products each with unique and incompatible signaling schemes. This standard was developed to provide an open path for communications between computers and more intelligent printers and peripherals.

Three interface connectors are defined. These three connectors are denoted 1284-A, 1284 -B, and 1284-C. The 1284-A and 1284-B connectors are equivalent to existing connectors on compatible devices. The 1284-C connector is a new, higher density connector, and is recommended for new designs.

The 1284-B connector is the existing 36-pin 0.085 centerline connector series commonly used on the peripheral side. This connector is available from a variety of manufacturers. The cable shall be retained using bail locks and latches.

The 1284-C connector is a new 36-pin 0.050 centerline connector recommended by this standard. This connector is available from a variety of manufacturers. The connector is used for both host and peripheral sides of the interface. The cable shall be retained using clip latches.

The connecting cable shall consist of 18 pairs of signal wires and shall be double-shielded ( both braid and foil).

We specialize in USB printer cable design and manufacturing !
Email or Call us Today with your specific requirements

cable-manufacturing-facility-ontario-ca

Canada Cable Design - Cable Prototypes - Cable Manufacturing - Custom Cable Molding & Strain Reliefs

CADESSYS Technologies Inc - A Reliable Canadian Cable Manufacturing Company for your Electrical and Electronic Wiring Products. We serve customers WORLDWIDE, with the fastest rack, patch panel and custom cable deliveries in the Canadian National, GTA Greater Toronto Area/ Toronto Ontario/ Southern Canada, North United States, Chicago, Illinois, Detroit Michigan, New York, and more...



karaoke-music-songs.com