Patch Cables / Patch Cords, Cat-5, Cat5e, Cat-6 & Cat 7
Ethernet Cables for High Speed Networks
DS3 Patch Cables / Patch Cords Our DS3 Telecom Patch Cables are used in connecting equipment for testing, signal patching, monitoring, and
trouble-shooting within the Central Office. These coaxial cables are also popular in broadcast studio applications. These advanced BNC cables are manufactured with true
75-ohm connectors, minimizing potential signal attenuation from mismatched impedance. They can be manufactured with a high-flex silicone jacket in multiple colors for easy
identification of transmit/receive signals. Furthermore they can be manufactured with pin tip tracers that enable LED illumination on DSX patch bays for cable routing identification. 
T1/DS1 Patch Cords, E1 Patch Cords and Cables, DS1 twisted pair cables and adapters,
 RJ45 - RJ45 T1/DS1 Crossover or Straight, Individual Shielded
Pairs
RJ45 – DB15 T1/DS1 Crossover or Straight, Individual Shielded Pairs
DB15 – DB15 T1/DS1 Crossover or Straight Individual Shielded Pairs
DS1 Telco64 Cable, 24 AWG Solid, Female / Blunt
DS1 Telco64 Cable, 24 AWG Solid, Female / Female
DS1 Telco64 Cable, 24 AWG Solid, Male / Blunt
DS1 Telco64 Cable, 24 AWG Solid, Male / Female
DS1 Telco64 Cable, 24 AWG Solid, Male / Male
Category 6 Patch cords, Cat 6 Patch cables
Our precision designed Category 6 patch cords provide the high speed you require for your installation. They minimize near-end crosstalk and are backward compatible
with slower protocols. Each patch cord is created with a slender, snagless boot to provide easy access in high-density installations. These patch cords are perfect for
Fast Ethernet, Gigabit Ethernet, and other speed-critical applications. All patch cords are individually tested for peak performance and are available in various lengths and colors. Our Category 6 cables are manufactured to the strictest performance requirements
as specified in TIA/EIA-568-B.2-1 using the highest level connector design and cable construction.
Cat 6 Connector Compatibility
Q. Can a Cat 6 modular plug be plugged into Cat 5 and 5e RJ-45 Jacks?
A. Yes. The physical dimensions of Cat 6 RJ-45 plugs and jacks are identical to Cat 5 and 5e plugs and jacks. They are backward compatible with Cat 3, Cat 5, and Cat 5e plugs and jacks.
Differences Between the 1000BASE-T and the 1000BASE-TX Standards
Q. What is the main difference between the IEEE 802.3ab 1000BASE-T and the ANSI/TIA 854 1000BASE-TX Gigabit Ethernet standards? A. Cat 5e cabling can be used with the 1000BASE-T standard. 1000BASE-TX requires Cat 6 cabling. The 1000BASE-TX standard can also be implemented with simpler electronics.
Category 7 Patch cords, Cat 7 Patch cables  What is the difference between CAT-5, CAT-5e, CAT-6, CAT-7... The Simple Answer:
CAT-5 is rated to 100M
CAT-5e is rated to 350M
CAT-6 and CAT6e is rated to 550M or 1000M depending on your source
CAT-7 is supposedly rated to 700M or presumably 1000M
CUSTOM PATCH CORDS / PATCH CABLE ASSEMBLIES
We assemble our patch cords using enhanced performance plugs and premium high-speed bulk cable tested to Giga Speeds. STRAIN RELIEF BOOTS
SNAP ON BOOTS
SNAGLESS BOOTS
|
