Infiniband Cables for High-Speed Server and Storage Interconnects
Quality Cabling Products for Infiniband, Fibre Channel, Gigabit Ethernet As a long established cable assembly supplier, we serve corporate end users with Infiniband cables for all their high speed server and storage equipment needs. The
Infiniband cable assemblies are high performance connectivity products, used primarily in corporate data centers for a variety of enterprise and database applications such as banking, insurance, managed
hosting services, healthcare, etc. The Infiniband bandwidth is expected to reach 1000 Gb/s in the near future, and the category is starting to penetrate general computing applications. We are dedicated to
supplying current and future Infiniband cable assemblies, such as InfiniBand 1x QDR, 4x DDR, 8x DDR and 12x DDR, for both the server and storage markets. Our prices are very competitive, and we offer Full
Technical Support for the Infiniband Cabling Products, that we sell.
Infiniband - High Performance, Low Cost, Simple and Flexible Solutions! Sample Infiniband Cables:
HSSDC2, Infiniband, Plug-to-Plug, Copper Cable Assembly
0.50mm (.020") Pitch LaneLink InfiniBand Cable Assembly, Non-Equalized, 28 AWG, 4X
0.50mm (.020") Pitch LaneLink InfiniBand Cable Assembly, Non-Equalized, 28 AWG, 12X
LaneLink DDR (Dual Data Rate) InfiniBand Cable Assembly, 28 AWG, 4X
0.50mm (.020") LaneLink DDR (Dual Data Rate) InfiniBand Cable Assembly, 12X
About HSSDC2 Infiniband
HSSDC2 is a high performance cable-to-board system with seven high-speed contacts to
transfer data rates of 2.5Gbps for InfiniBand, Fiber Channel and Gigabit Ethernet applications. The system has enhanced capabilities of up to 5 Gbps for next-generation designs. HSSDC2 is
also supporting many Fibre Channel and Gigabit Ethernet applications including server I/O chassis, switches and network adapters for storage arrays. About LaneLink Infiniband
Molex's LaneLink 4X and 12X connectors are a cable-to-board I/O system optimized for
differential signaling at and above 2.5 Gbps per pair. The PCB receptacle, with its die-cast frame
featuring unitary latch posts and screw attachment to the PCB, provides outstanding isolation of cable loads from the SMT solder tails. Cable assemblies are available with pinch-to-release
latch levers for InfiniBand* and 10GBASE-CX4 protocols or with jackscrews for 4X Serial Attached SCSI (SAS) and Serial ATA (SATA) applications.
Exceptional Prices for Corporate End Users, Data Centers, Dealers, and Resellers
Call us or E-Mail us for a Quick Quote |
