Network Cabinet Features
Our cabinets come with (2) pair of adjustable Tapped Mounting Angles. (Also known as Mounting Rails).
Are power strips required? The 70" V.P.O. cabinet uses a 70" power strip (11 receptacles, 6' cord). The 77" V.P.O.
cabinet uses a 77" power strip (12 receptacles, 6' cord). Also available is a 46" power strip (10 receptacles, 6' cord). The 46" power strip is more economical and is recommended when the
customer requires (2) strips per cabinet. All standard power strips are 15 amps, 120 volts. If customer requires a 20 amp Power Strip, these are available in 70" length. They contain 12
receptacles with a 6' cord. If 20 amp is required, the customer may also require a Twist Lock Plug. At times, customer may require twist lock plugs on the 15 amp power strips.
Our standard is the Rotron Caravel Fan. This is rated at 560 CFM (cubic foot/minute). There are other fans available but these must be
adapted to fit the cabinet. The Caravel Fan is 10" in diameter and 3 1/2" deep. When it is mounted in the cabinet, it protrudes 1/2" into the usable cabinet space. It can also be mounted on the
The cabinets are manufactured to accept a plexiglass door. The door is manufactured symmetrically and can be right or left hand hinged. If the cabinet is ordered with a plexiglass door and the customer wants to change the door from right to left hinged, they can do so by removing the door, turning it 180 degrees and reattaching it to the cabinet. There is no drilling required.
The rear doors can be louvered or slotted, with fan pattern. The slotted rear door is preferable
when the customer may want to mount the fan on the rear door.
The top panel is usually supplied with a slotted fan pattern. This is so the fan can be mounted in the top panel without any
problems. Some customers require louvered or solid tops. Bear in mind, if the customer wants a louvered top, they will not be able to mount the fan in the top panel.
The cabinets are available in IBM, white, IBM blue, black, light, medium and dark gray as well as any FED-STD-595 color. If they have a
special color they would like to match, they can have this by giving us a color chip to match. See Color Chart.
CASTERS AND LEVELERS
Our cabinet is manufactured to receive casters and levelers without the need for any special hardware or drilling.
Shelves come in various styles.
Flat Shelves mount to the two (2) pair of tapped angles that are standard in our cabinets.
need only one pair of tapped angles in order to be mounted. The standard cantilevered shelf takes up 7" of panel space. There are, however, other cantilever shelves that take up less panel space, i.e. 3 1/2". We also manufacture
Center mount Cantilever Shelves. These are used with open relay racks.
All front and rear doors are supplied with locks, unless the customer does not want locks.
Side panels can be supplied if needed. Our side panels are actually side doors that open and can be removed if necessary, without
tools. They are lockable from the inside and require a Phillips head screwdriver to lock. This helps qualify for U/L requirements.
PULL OUT SHELVES
These are shelves that enable the customer to mount his or her keyboard or other equipment that needs to be pulled from the
cabinet for use or service. These mount in the same manner as our standard flat shelf.
GTI: Complete racks, cabinets and enclosures to hold and protect
every element of your network... safely and economically
E-Mail or Call us Toll Free: