Heatshrink marker - mark wire, cable, terminals, and other components, thermal transfer printers

SHRINK-TAG MARKERS

HellermannTytons Shrink-Tag system is a heatshrink identification method which makes it easy to mark wire, cable, terminals, and other components.

For efficient marking, Shrink-Tags can be printed using HellermannTytons thermal transfer printers and the TTHST ribbons. Shrink-Tags are also pin-fed for use with selected 9 pin dot matrix printers. TagPrint software can be used with a standard dot matrix printer to print on the Shrink-Tag markers. Marks can also be made with a printer, typewriter or pen. After the Shrink-Tag is heated and shrunk, the imprint is permatized and solvent resistant.

Shrink-Tag is self-extinguishing and recognized to U.L. standard 224 for print performance, heat shock and flammability.

HellermannTyton also offers a military specified version of the Shrink-Tags, in both yellow and white, with or without perforations. When used with HellermannTyton thermal transfer printers or a dot matrix printer, these military specified Shrink-Tags meet Mil-23053/5, Class I and III, Mil. Std. 202 Method 215 (except solvent C because it is ozone depleting) and Mil, M-81531 for print performance.

Shrink-Tag Markers

Material: Flexible, radiation cross-linked polyolefin

Shrink Ratio: 3 to 1

Shrink Temp.: 212 o (100 C)

Temp. Range: -22 F to +220 F (-30 o C to + 105 o C)
Mil-Specified version=-67 oF to +275 oF (-55 oC to +135 oC)

Rating: 600 Volts. Tensile Strength: 150 PSI.

Packaging: 250 markers per box. On a roll.

Specifications:

Flammability U.L. 224. U.L. Recognized.
Mil-Specified version=Mil-M-81531 for print performance
Mil-M-23053/5 Class I and III
MilSTD 202 Method 215 (except solvent C)



advert