|
MEGABAND ™ CATEGORY 5E PATCH PANELS
HellermannTyton MegaBand Category 5e patch panels offer the same features as the GigaBand panels; however, they have been developed to fully comply with the Category 5e performance standard. When used with recommended horizontal cables, these patch panels are key components in HellermannTyton's Category 5e system which has been tested up to 200MHz. HellermannTyton offers Category 5e patch panels in both the AlphaSnap and Universal styles.
Category 5e AlphaSnap ™ Patch Panel
 The HellermannTyton Category 5e AlphaSnap line of patch panels is the ultimate in patch panel technology. The panels are equipped with individual, fully modular printed circuit boards (PCBs). Rather than replace the entire panel, each port can be individually removed and replaced if damaged during installation. The AlphaSnap panel is equipped with a rear cable manager. Constructed from extruded aluminum and toughened plastic, this rear cable management bar easily snaps in and out of the back of the patch panel without the need of tools. Individual cable tie mounts located along the length of the management bar slide into position, which ensure that cables are not twisted or pinched during installation. The AlphaSnap panel introduces a patented slide labeling system, providing the ultimate protection for panel identification. The panels are configured for both T568A and T568B wiring, eliminating the need for additional panels.
 All modules are individually removable and replaceable
Panel features very sturdy construction with thick rolled-edge steel plates
Unique, patented slide label system provides a flush front panel face
Label ramp provides easy insertion of the patented slide label
Pre-perforated label sheets are available with HellermannTyton TagPrint Pro software*
Configured for 568A or 568B wiring on same panel
Lightweight aluminum rear cable manager comes with the panel and provides for neat and organized installation
Category 5e Universal Patch Panels
HellermannTyton's Category 5e Universal patch panels are pre-configured in 12, 24 and 48 port versions to meet the needs of nearly all customer applications. The panels are offered with increments of 6 port modules – which can be replaced if damaged during installation. The Universal panels can be used for both T568A and T568B wiring configurations, thus eliminating the need for extra inventory. The panels have a very flush front face which provides for an attractive appearance. Hellermann-Tyton offers a very simple, easy-to-install rear cable manager which is recommended for all Category 5e installations.
 6 port modules can be replaced easily if damaged during installation
Front face provides an attractive, flush appearance
Write-on labels provided for easy identification
Self-adhesive labels are available with HellermannTyton TagPrint Pro software*
Configured for 568A or 568B wiring on same panel
Optional rear cable manager provides for neat and organized installation
Category 5e Vertical Punch Patch Panel
 This panel offers Category 5e performance in an economical, high density UTP format. It features a right-angled frame, with the PCBs mounted horizontally allowing for vertical punch downs. It is also provided with built-in cable manage-ment. The panel can be pulled out from the front of the relay rack and terminated from the front using Hellermann-Tyton's vertical panel outrigger.
|
