cable management tools to cover just about any application, D-Ring-style cable manager, U-Ring-style cable manager, enclosed raceway with hinged cover

Lgo_cc.gif (9908 bytes)

DAMAC offers a variety of cable management tools to cover just about any application.

CableControl™ - "D-Ring"-style cable manager mounts anywhere.

CableTrough™ - "U-Ring"-style cable manager utilizes velcro ties to retain wires.

CableCloset™ - An enclosed raceway with hinged cover. A revolutionary

breakthough in it's own right.

The unique and cost effective patented design provides an easy solution for installing, routing and moving cables. Install CableControl™ horizontally or vertically in cabinets, on free standing racks and on backboards. CableControl™ was designed by installers tired of using cable management products that only complicated installations. No pre-determined mounting holes are necessary. The mounting clips are easily inserted anywhere along the CableControl™ frame, providing maximum flexibility.

Cabinet Applications
Cable management is about minimizing cable stress, organizing cable routing and easily making adds, moves and changes after initial installation. Most cable management products are designed for specific applications only, such as between patch panels on a freestanding rack. DAMAC's CableControl™ works well for this application as well as to support cables vertically on both the front patching side and the rear termination side.

Rack Applications
CableControl™ can also be applied to freestanding racks. Mount CableControl™ on the front and rear of your racks for total cable management. Larger CableControl™ units can be used between racks as a cable raceway. When installed, CableControl™ is fully grounded to your rack grounding system.

Constructed of Cold Rolled Steel, CableControl™ is strong enough to support Coaxial, Twinaxial, IBM Type 1, 2, and 6 cables and open enough to support category 5 twisted-pair and fiber patch cords. The ability to provide a larger cable channel horizontally and vertically allows you to minimize cable bends and maximize the capability of your high-speed network cabling. CableControl™ is available in a variety of sizes to accommodate many applications.

Backboard Applications
CableControl™ manages cables on backboards without the use of cable ties. Also, unlike D rings, cables can be fed quickly through openings in the ring slots. DAMAC offers a shorter version of CableControl™ to fit between 110 type termination blocks to complete the backboard application.

CableControl™ supports a variety of cabling applications.

CableControl™™

CableTrough™
Cabletrough™ is similar to CableControl™, with greater flexibility and accessibility. The Cabletrough retains wires by the use of adjustable Velcro straps. It mounts anywhere, and can be used an an overhead cableway, vertical and horizontal raceway in cabinets, and in many other applications.

CableCloset™
The new and revolutionary CableCloset™ is the perfect solution for users who want to conceal unsightly cables, while maintaining control and organization. Say "Goodbye" to traditional cableways and plastic covers you can never put back on once removed. The CableCloset's hinged cover is as easy to replace as closing the door!

Buy Cables and
Accessories
ONLINE

Damac Products
| Racks, Shelves | Cable Management |



advert